Installation and Maintenance of JST Connector
Installation precautions:
Before installing a JST connector, it is necessary to confirm whether the model, specifications, rating, and performance of the selected JST connector meet the requirements for electrical equipment or connections between electrical equipment, as well as whether it meets relevant regulations and design standards.
Before installing the JST connector, it should be checked for any defects such as damage, deformation, rust, contamination, etc. If there are any, they should be replaced or cleaned.
Before installing the JST Connector, the power should be cut off to prevent danger such as electric shock or short circuit.
When installing the JST Connector, follow the instructions in the product manual or performance specification book of the JST Connector, use the correct tools and methods, and avoid using too much or too little force to prevent damage to the JST Connector or affecting its performance.
When installing the JST connector, attention should be paid to aligning the contact parts (needle base and socket) of the JST connector and pressing them into place until a "click" sound is heard or felt. Do not forcefully insert or remove the JST Connector to avoid poor contact or breakage.
When installing JST connectors, attention should be paid to keeping them clean and dry, avoiding contact with corrosive substances, corrosive gases, high temperature and humidity, and direct sunlight and other environmental factors, in order to avoid affecting their contact and insulation performance.
When installing the JST connector, attention should be paid to protecting the wire part of the JST connector to avoid excessive bending, stretching, twisting, flattening, and other external forces, in order to avoid damaging the connection between the wire and the contact part or the wire itself. When wiring, appropriate margin should be left for the wires to reduce stress on the JST connector.
Maintenance precautions
Before maintaining the JST Connector, the power should be cut off to prevent danger such as electric shock or short circuit.
When maintaining the JST connector, it should be regularly checked for defects such as damage, deformation, rust, contamination, etc. If there are any, they should be replaced or cleaned.